EP200 Booster using an ECC82 Tube for Jorn in Norway. Controls are Level and Gain, and the circuit is voiced for Bass Guitar with bigger in/out capacitors than I usually use. The circuit is based loosely on the input section of a Selmer EP200 Echo unit.
Tonebender mk1 for Ken in the UK, stock circuit, OC71, OC45, OC84 transistors, Turret board construction, White Hammertone powder coat finish.
A FY-2 for John in the USA, stock circuit apart from the added scoop control.
Fuzz Face for Dave from Belfast band Slomatics. Started out as a Dunlop Re-issue, I took out all the guts (pcb circuit) and added my own. Circuit modified for more bass, and 9v DC input added.
Stock Tonebender mk1, handmade turret board construction, bronze hammertone powdercoated case, OC71, OC45, and OC84 transistors. Looks and sounds great!
Tonebender mk1 for Francesco in Italy. This one has slightly larger input and output capacitors than stock and more volume, same as the Doombender mk1.
Shin Ei Companion Fuzz FY-2 for Dave Hammer in Australia with switchable input and fuzz control capacitors going from 'stock' to more bass. Additional scoop control as well. Capable of loads more tonal variety than the original FY-2 circuit.
Selmer echo boost, blue smooth hammerite finish, handmade turret board, circuit half on board and half on the tube socket, tropical fish input capacitor, 12v dc power only.
This is basically a Tonebender mk1 with larger input and output capacitors for more bass, fixed bias, and a 1m2 output resistor for more volume. Uses OC71, OC73, and OC45 germanium transistors and tagboard circuit construction. Soundclip soon.
Moomin Buzzaround for Dave in Ireland. Dave chose the image for the labelling, silver Hammerite finish, NKT214 transistors.
Laney Klipp combo I picked up last week, it's solid state and has spring reverb, tremolo, and 'klipp' (fuzz) effects built in, plus 2 x 12" celestion speakers. Can't find any info on the internet about this version.
2 Buzzaround clones for Rex in the USA. He asked for a very specific spec for these pedals, ac-128 transistors, Wima input/output caps, BC Electrolytics, chrome LED Bezel, and shockproof input/output sockets. These have the new "beehive" design too. Also, some of you may have noticed the 'Ghost' labelling on these and a few other recent pedals, this is the new company name for my Guitar pedals!
Univox Superfuzz for Scott in the USA. 2SC828 transistors, 1N34A germanium diodes, PCB by Mr John Lyons, hand painted gold Hammerite finish.
Shin Ei FY-2 for Pierluigi in Italy, modded for extra Bass, and with custom labelling.
Maestro FZ-1 for Neil from Seeland/Windscale. Its for Bass so has a slightly larger value input capacitor, and a switch to choose between the stock value and a much larger value output capacitor. 2 x 1.5v batteries required!
JHS Treblebooster for Joseph in the USA. Has a switch to choose between the original 0.01uf input capacitor and a blend section where you can use a knob to blend between 4700pf and o.o47uf input capacitors.
Tonebender mkIII for Jon. Stock circuit apart from slightly bigger input/output capacitors and no volume limiting resistor. NKT214 transistors for q1 and q2, a CV7042 for q3. Soundclip here.
Kay Tremolo in a Cry Baby Wah Wah shell for Ben. The treadle controls the rate of the Tremolo. Other controls are Level and Depth. Nice build and a true 'one off'.
Posts
All Comments
